Minka Lavery 9149-407 Installationsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

Model # 9149

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

MOUNTING THE FIXTURE (Fig. 1)

1. Shut off power at the circuit breaker (avertissement!

couper le courant au niveau des fusibles ou du

disjoncteur)and remove the old fixture including the

mounting hardware.

2. Carefully unpack your new fixture and lay out all the

parts in a clear area. Take care not to misplace any

small parts necessary for installation.

3. Unscrew the finial (K) and the nut (L), remove the

bottom holder (J) and the cage (I).

4. Thread the two studs (B) into the pre-drilled holes in

the crossbar (E) (Part#A-010) spaced the same

distance apart as the holes in the canopy (G), and

then tighten with the nuts (C). Note: The length of

studs (B) into crossbar (E) may be adjusted if

necessary.

5. Attach crossbar (E) (Part#A-010) using junction

box screws (D) (Part#8/32”*1”L) to the outlet box (A)

(Fig 1).

CONNECTING THE WIRES (Fig. 2)

6. Connect the electrical wires as shown in Fig.2.

making sure that all wire connectors are secured. If

your outlet box has a ground wire (green or bare

copper), connect the fixture’s ground wire to it.

Otherwise, connect the fixture’s ground wire directly

to the single bar using the green screw (F)

(Part#8/32”*1/3”L) provided.

COMPLETING THE INSTALLATION (Fig. 1)

7. Align canopy (G) onto stud (B) and secure with cap

nuts (H). (Fig 1)

8. Install 2X60W/E12 bulbs (no bulb included) in

accordance with the fixture specification —DO

NOT EXCEED THE MAXIMUM WATTAGE

RATING! (NE PAS DEPASSER LA PUISSANCE

NOMINALE MAXIMALE!)

9. Replace the cage (I) and secure with the nut (L),

and replace the bottom holder (J), secure with the

finial (K).

Your installation is now complete. Return power to the

outlet box and test the fixture.

Fig. 1

“CAUTION-RISK OF FIRE CONSULT A QUALIFIED

ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT

CONDUCTOR”

ATTENTION – RISQUE D’INCENDIE, CONSULTER UN

ÉLECTRICIEN QUALIFIÉ POUR VOUS ASSURER QUE

LES CONDUCTEURS DE LA DÉRIVATION SONT

ADÉQUATS.

U.S. Patent: D515,237

This product is protected by United

States Federal and/or State Law,

including Patent and/or Copyright laws.

BARE COPPER( GROUND)

Fig.2

F I XT URE

WIRES

WHI T E

BLACK

(HOT)

WIRES

HOUSE

GRE E N OR

WHI T E

(NEUTRAL)

WIRES

HOUSE

( GROUND)

COPPER

BARE

FI XTURE

WIRES

BLACK

WIRES

F I XT URE

GRE E N OR

HOUSE

WIRES

INSTALLATION INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Model # 9149 READ AND SAVE THESE INSTRUCTIONS WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. AVERTISSEMENT! COUPER LE

Kommentare zu diesen Handbüchern

Keine Kommentare

Minka Lavery 9149-407 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Minka Lavery 9149-407 herunter. Minka Lavery 9149-407 Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Minka Lavery 9149-407