Minka Lavery 72252-66 Installationsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

Model # 72251/72252/72253

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

Fig. 1

“CAUTION-RISK OF FIRE CONSULT A

QUALIFIED ELECTRICIAN TO ENSURE

CORRECT BRANCH CIRCUIT CONDUCTOR”

BARE COPPER( GROUND)

Fig.2

F I XT URE

WIRES

WHI T E

BL ACK

(HOT)

WIRES

HOUSE

GREEN OR

WHI T E

( NEUTRAL )

WIRES

HOUSE

(GROUND)

COPPER

BARE

F I X T URE

WIRES

BL ACK

WIRES

F I X T URE

GREEN OR

HOUSE

WIRES

1. Shut off power at the circuit breaker and remove old

fixture including mounting hardware.

2. Carefully unpack your new fixture and lay out all the

parts in a clear area. Take care not to misplace any

small parts necessary for installation.

3. Pull black and white wires out of electrical outlet box

(A).

4. Thread the two studs (B) into the pre-drilled holes in

the circular strap (C) spaced the same distance

apart as the holes in the back plate (H), then tighten

with the nut (E).

5. Attach Circular Strap (C) using Outlet Box Screws

(F) to the outlet box (A), (Fig 1).

6. Connect the electrical wires as shown in Fig.2.

Making sure that all wire connectors are secured. If

your outlet box has a ground wire (green or bare

copper), connect the fixture’s Ground wire to it.

Otherwise, connect the fixture’s Ground wire directly

to the circular strap using the Green Screw (D)

provided.

7. To prevent moisture from entering the outlet box (A)

and causing a short, use clear silicone Sealant to

outline the outside of fixture back plate (H) where it

meets the wall leaving a space at bottom to allow

moisture a means to escape.

8. Place the back plate (H) into stud (B) and secure it

tightly against the wall using cap nut (G). (Fig 1)

9. At this point, unscrew the screws (K) and metal

squash (J), take the shade (I) to install the light

bulbs in accordance with the fixture specification—

DO NOT EXCEED THE MAXIMUM WATTAGE

RATING!

10. Replace the shade (I) and the metal squash (J),

secure with the screws (K).

Your installation is now complete. Return power to the

outlet box and test the fixture.

INSTALLATION INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Model # 72251/72252/72253 READ AND SAVE THESE INSTRUCTIONS WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. Fig

Kommentare zu diesen Handbüchern

Keine Kommentare

Minka Lavery 72252-66 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Minka Lavery 72252-66 herunter. Minka Lavery 72252-66 Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Minka Lavery 72252-66