Minka Lavery 71162-84 Bedienerhandbuch PDF herunterladen

INSTALLATION INSTRUCTIONS FOR 71162

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

READ AND SAVE THESE INSTRUCTIONS

Fig.1

PREPARATION (Fig. 1)

1. Shut off the power at the fuse box or circuit

breaker. If necessary, remove the old fixture

including the mounting hardware.

2. Carefully remove the new fixture from the carton

and check that all parts are included as shown in

the illustration.

MOUNTING THE FIXTURE (Fig.1)

3. Thread the two mounting screws (A) (Size: #8-

32*1.6”L) part way into the circular strap (B).

Secure circular strap (B) to the junction box (not

provided) with junction box screws (C) (Size: #8-

32*0.6”L). The side of the circular strap marked

“GND” must face out. The length of mounting

screws (A) into circular strap (B) may be adjusted

if necessary.

CONNECTING THE WIRES (Fig. 2)

4. At this point, connect the electrical wires as shown

in Fig. 2 making sure all wire connectors are

secured. If your outlet box has a ground wire

(green or bare copper) connect fixture’s ground

wire to it. Other wise, connect the fixture’s

ground wire directly to the mounting plate using

the green screw provided. After the wires are

connected, tuck them neatly inside the junction

box.

COMPLETING THE INSTALLATION

5. Place the fixture body (D) over mounting screws

(A) and secure with finials (E).

6. Loosen the screws (F), and remove the cup (H).

7. Install the light bulb (not included) in accordance

with the fixture’s specifications (DO NOT

EXCEED THE MAXIMUM WATTAGE!) (NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!)

8. Place the cup (H) onto the glass (J) and secure

with screws (I).

9. Raise the cup (H) over the socket (G) and secure

with screws (F).

Your installation is now complete. Return the power

to the junction box and test the fixture.

Set# A-022

- Circular strap

- Ground screw

- Mounting screws*2

- Junction box screws*2

Fig.2

Inhaltsverzeichnis

Seite 1 - - Junction box screws*2

INSTALLATION INSTRUCTIONS FOR 71162WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES

Kommentare zu diesen Handbüchern

Keine Kommentare

Minka Lavery 71162-84 Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Nein Minka Lavery 71162-84 herunter. Minka Lavery 71162-84 Instructions / Assembly Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Minka Lavery 71162-84