Minka Lavery 5136-84 Bedienerhandbuch PDF herunterladen

INSTALLATION INSTRUCTIONS FOR 5136

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

READ AND SAVE THESE INSTRUCTIONS

Fig.1

PREPARATION (Fig. 1)

1. Shut off the power at the fuse box or circuit

breaker. If necessary, remove the old fixture

including the mounting hardware.

2. Carefully remove the new fixture from the carton

and check that all parts are included as shown in

the illustration.

MOUNTING THE FIXTURE (Fig.1)

3. Position the mounting bracket (B) on the wall, and

mark the location of the two dry wall anchors (A).

Pre-drill the holes for the drywall anchors (A) and

insert the drywall anchors (A) into the wall.

4. Attach the mounting bracket (B) to the junction

box using the junction box screws (D) (Size: #8-

32*0.6”L). The side of the mounting bracket

marked “GND” must face out.

5. Place the wood screws (C) through the mounting

bracket (B) and into the drywall anchors (A) to

secure the mounting bracket (B) to the wall.

CONNECTING THE WIRES (Fig. 2)

6. At this point, connect the electrical wires as

shown in Fig. 2, making sure that all wire

connectors are secured. If your outlet box has a

ground wire (green or bare copper), connect the

fixture’s ground wire to it. Otherwise, connect the

fixture’s ground wire directly to the mounting plate

using the green screw provided. After the wires

are connected, tuck them carefully inside the

outlet box.

COMPLETING THE INSTALLATION (Fig. 1)

7. Place the fixture body (F) over the mounting

bracket (B), and secure with mounting screws (E)

(Size:#8-32*0.5”L).

8. Install the light bulbs (included) in accordance with

the fixture’s specifications (DO NOT EXCEED

THE MAXIMUM WATTAGE!) (NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!)

Your installation is now complete. Return the power

to the junction box and test the fixture.

Note: Illustration (Fig.1) on this manual is for

installation purposes only. It may or may not

be identical to the fixture purchased.

Fig.2

Set# A-021-190104

- Hanging bracket

- Ground screw

- Mounting screws*4

- Junction box screws*2

- Wood screws*2

- Anchors*2

(included) in accordance with 1

Inhaltsverzeichnis

Seite 1 - (included) in accordance with

INSTALLATION INSTRUCTIONS FOR 5136WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES

Kommentare zu diesen Handbüchern

Keine Kommentare

Minka Lavery 5136-84 Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Nein Minka Lavery 5136-84 herunter. Minka Lavery 5136-84 Instructions / Assembly Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Minka Lavery 5136-84