Minka Lavery 4971-269 Bedienerhandbuch PDF herunterladen

INSTALLATION INSTRUCTIONS

Item#4971-269 (Rev. 03/13/2014)

READ AND SAVE THESE INSTRUCTIONS

WAR N I N G ! S H U T P OW E R O F F AT F U S E O R C I R C UI T BRE AK E R .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Fig.1

Fig. 2

Fig.3

ASSEMBLING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker. If necessary, remove

the old fixture from the ceiling including the mounting hardware.

2. Carefully remove the new fixture from the carton and check that

all parts are included as shown in the illustration.

3. Screw the fixture loop into the nipple onto the fixture body (A)

until snug.

4. Place the cover (B), glass shade (C) and metal ring (D) over the

socket of the fixture body (A). Then secure with socket ring (E)

using the spanner (F) provided.

HANGING THE FIXTURE (Fig. 3)

5. Thread the nipple into the ceiling loop until snug.

6. Thread the other end of the nipple into the crossbar until snug.

Note: The length of the nipple into the crossbar may be

adjusted if necessary.

7. Place the lock washer and hex nut over the end of nipple

protruding through crossbar. Then thread the hex nut onto the

nipple until snug.

8. Take this crossbar assembly and mount it to the ceiling outlet

box using the mounting screws (Size: #8-32N*L0.5”). The side

of the crossbar marked “GND” must face out.

9. Use proper chain pliers to open one end link of the chain and

connect to the fixture loop. Then close the link.

10. By measuring, determine the desired hanging height and use

the chain pliers to remove and discard the excess chain.

11. Carefully lace the fixture wires through the chain.

12. Slip the lock collar and canopy over the chain and allow them

to rest on the fixture body.

13. Open the other end link of the chain and attach it to ceiling

loop and close the link.

14. Feed the fixture wires through the loop and nipple assembly

and pull tight.

CONNECTING THE WIRES (See Fig.2)

15. At this point, connect the electrical wires as shown in Fig. 2,

making sure that all wire connectors are secured. If your outlet

box has a ground wire (green or bare copper), connect the

fixture’s ground wire to it. Otherwise, connect the fixture’s

ground wire directly to the crossbar using the green screw

provided.

16. Tuck the wire connections neatly into the ceiling outlet box and

raise the canopy to the ceiling. Thread the lock collar to the

ceiling loop to secure the canopy against the ceiling.

COMPLETING THE INSTALLATION (Fig. 1)

17. Install the light bulb(s) (not included) in accordance with the

fixture’s specification. (DO NOT EXCEED THE MAXIMUM

WATTAGE RATING!) (NE PAS DEPASSER LA PUISSANCE

NOMINALE MAXIMALE!)

Your installation is now complete. Return power to the outlet box

and test the fixture.

Note: Illustration (Fig. 1) on this manual is for installation

purposes only. It may or may not be identical to the fixture

purchased.

Notice: It is important to use proper chain pliers (not included)

To OPEN and CLOSE the chain included with this fixture. Do not

open them with other tools that may twist or stress the chain

links. It is important to use proper chain pliers like the ones

shown in the diagram.

LA-2401E

Socket Ring # SKT-RING-26

Set# A-016

- Crossbar

- Ground Screw

- Mounting Screw*2

Chain# HCH2072-269

Canopy

Outlet Box

Mounting Screw

Nipple

Lock Collar

Crossbar

Hex Nut

Lock Washer

Loop

Wire

Chain

Ceiling Loop

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green

(Ground)

LOOP

Spanner # WRH-T1-51

INSTALLATION INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Item#4971-269 (Rev. 03/13/2014) READ AND SAVE THESE INSTRUCTIONS WAR N I N G ! S H U T P OW E R O F F AT F U S

Kommentare zu diesen Handbüchern

Keine Kommentare

Minka Lavery 4971-269 Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Nein Minka Lavery 4971-269 herunter. Minka Lavery 4971-269 Instructions / Assembly Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Minka Lavery 4971-269