Minka Lavery 4740-206 Installationsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS FOR 4740-206

Read and save these instructions

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

MOUNTING THE FIXTURE

Installation (see fig.1)

1. Disconnect power at main electrical panel before

installation.

2. Thread the two mounting screws about 1/4” into the

pre-drilled holes in the mounting plate, spaced about the

same distance apart as the holes in the fixture back

plate. Attach the mounting plate to the junction box

using two junction box screws. The side of the

mounting plate marked “GND” must face out.

3. Guide fixture wires through hole in center of mounting

plate.

4. Follow wiring instructions carefully (see fig.2).

5. Mount fixture by aligning mounting holes in fixture

back plate with mounting screws and threading ball nuts

(D) onto mounting screws.

6. Place the glass panel (C) and the glass shade (A) into

the metal trim (B).

7. Install the light bulbs in accordance with the fixture’s

specifications. DO NOT EXCEED THE MAXIMUM

WATTAGE RATING!

Wiring (see fig.2)

1． Connect the electrical wires as follows. Connect the Black

wire from the fixture to the black house (hot) wire.

Connect the white wire from the fixture to the white

(neutral) house wire. Make sure all wire nuts are secured.

You may wrap the connections with electrical tape. If

your outlet box has a ground wire (green or bare copper)

connect fixture’s ground wire to it. Otherwise attach the

bare copper fixture wire to the green ground screw on the

mounting plate.

2． Tuck the wire connections neatly into the wall junction

box.

Fig.1

Fig.2

White or

HOUSE

Black

WIRES

(Hot)

Smooth

FIXTURE

WIRES

Black or

Ribbed

WIRES

FIXTURE

Bare Copper(Ground)

FIXTURE

WIRES

Copper

(Ground)

HOUSE

(Neutral)

WIRES

White

Bare

Green or

WIRES

HOUSE

MIN 90ºC SUPPLY CONDUCTORS

MOUNTING THE FIXTURE 1

Inhaltsverzeichnis

Seite 1 - MOUNTING THE FIXTURE

INSTALLATION INSTRUCTIONS FOR 4740-206 Read and save these instructions WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER . MOUNTING THE FIXT

Kommentare zu diesen Handbüchern

Keine Kommentare

Minka Lavery 4740-206 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Minka Lavery 4740-206 herunter. Minka Lavery 4740-206 Installation Guide [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Minka Lavery 4740-206