Minka Lavery 1005-44-PL Installationsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

For Model #1005-44-PL

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

CAUTION

Turn off the main power at the circuit breaker before installing

the fixture, in order to prevent possible shock.

GENERAL

All electrical connections must be in accordance with local

and national electrical code (N.E.C) standards. If you are

unfamiliar with proper electrical wiring connections obtain the

services of a qualified electrician.

Remove the fixture and the mounting package from the box

and make sure that no parts are missing by referencing the

illustrations on the installation instruction.

ASSEMBLY AND INSTALLATION

1. Turn off the power.

2. Pull the Supply Wires (3)&(4) and House Ground Wire(2)

out from the Outlet Box(1)

3. Install the Canopy(11)to the Outlet Box(1)by using two

Mounting Screws(13)(Note: The side of the Canopy

marked”GND” must face out)

4. Position your fixture over the Outlet box (1). Mark the

location of the four Slot Holes(14) located on the fixture

body. Remove the fixture body from the ceiling. Drill the

four holes(9)using the appropriately sized drill bit. Insert

the provided ceiling anchors(10) into the holes.

5. Make the wiring connections: Connect the House Ground

Wire (2) to the Fixture Ground Wire(8); connect the White

Supply Wire (3) to the White Fixture Wire (7); connect

Black Supply Wire (4) to the Black Fixture Wire (5) using

Wire Connectors(6). Carefully tuck all wires back into the

Outlet Box.(See Fig.3)

6. Attach the Fixture Pan(22)to the Canopy(11)through the

two Downward Screws(12)and tight it with two Nuts(15)

7. Feed the four Anchor Screws (16) through the Slot Holes.

Tighten the Anchor Screws into the Ceiling Anchors until

the Fixture Body is flush with the ceiling.

8. Install the tube (18). Please follow the wattage label

located on the fixture body. Do not exceed the

recommend wattage.

9. Follow drawing #2 to install the Acrylic Lens (19). Hook

the Clips(21) of the lens to the curve edge of the Fixture

Pan (22 ). (see Figure 2 )

INSTALLATION IS NOW COMPLETED

Fig.3

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green

(Ground)

PDF created with pdfFactory Pro trial version www.pdffactory.com

INSTALLATION INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS For Model #1005-44-PL WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. CAUTION Turn off the main power at the circuit br

Kommentare zu diesen Handbüchern

Keine Kommentare

Minka Lavery 1005-44-PL Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Flachbildschirm-Deckenhalterungen Minka Lavery 1005-44-PL herunter. Minka Lavery 1005-44-PL Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern